All Entries Tagged With: "MEMS"
MEMS tunneling accelerometer
Experimental setup utilizes labVIEW to control a rate table and compactRIO FPGA. Duration : 0:0:47
MEMS & Nano Research
Refections on time spent at one of the best research groups in the world. Optical & Semicondiuctor Devices Group, Electrical & Electronic Engineering, Imperial College, London Duration : 0:3:35
What are MEMs?
MEMs are a new form of circuit breaker that respond to changes in voltage in microseconds instead of the current milliseconds. They are being developed by GE. Duration : 0:1:17
MEMS Mirror Animation
Link to OPN article ‘Scanned Laser Pico-Projectors: Seeing the Big Picture (with a Small Device)’ by Mark Freeman, Mark Champion and Sid Madhavan For the application of this MEMS Mirror see next post. Duration : 0:0:26
3D Tracking and Position Measurement with MEMS Mirrors
3D Tracking – Two 4-quadrant devices track a photo-detector target in 3D space. As a result of the two separate relative position acquisitions, a real-world XYZ position measurement is possible, and the result is presented to the user in mm distance from a reference point between the devices. System performs position measurement with 16-bit precision [...]
Larger MEMS Micromirrors in Operation
Large Micromirrors – Latest actuators from ARIMEMS7 generation of devices provide bi-directional two-axis scanning. Largest mirrors to date in the 2mm diameter and the 3mm diameter range are mounted on the actuators and demonstrated. To date, most generations of ARIMEMS micromirror devices provided 1-quadrant (uni-directional) scanning in two-axes, eg from 0° to 8° on each [...]
MEMS Assembly
Micro assembly, with clearances of 10 microns on the ONYX from Air-Vac Engineering Duration : 0:1:15
Micro assembly, Micro Dispensing, MEMS
AIR-VAC: The ONYX500 is the ultimate precision micro assembly, dispensing and prototyping system for micro-mechanics, semiconductors, electronics and photonics. Duration : 0:7:11
Automated Pick and Place of microparts
Pick and place of 20x40x5 µm silicon micropart. Cycle is close to 2 seconds. 60 cycle have been succesfully made. Duration : 0:0:42
Adhesion effect during a micropart manipulation
Adhesion effect during manipulation of a silicon micropart. Its size is 20x40x5 µm. Object stick to the finger after gripper’s opening. It is then impossible to release the object. Duration : 0:0:3