Micro-Electro-Mechanical-Systems (MEMS) » Documentaries

Electrical Engineering C245 – Lecture 14: Energy Methods I

admin — Mon, 17 Oct 2011 05:48:23 +0000

Introduction to MEMS Design

Duration : 1:21:45

Electrical Engineering C245 – Lecture 14: Energy Methods II:

admin — Mon, 17 Oct 2011 05:48:23 +0000

Introduction to MEMS Design

Duration : 1:21:2

Electrical Engineering C245 – Lecture 15: Energy Methods II

admin — Mon, 17 Oct 2011 05:48:23 +0000

Introduction to MEMS Design

Duration : 1:19:40

Electrical Engineering C245 – Lecture 15: Energy Methods II

admin — Mon, 17 Oct 2011 05:48:17 +0000

Introduction to MEMS Design

Duration : 1:19:40

Electrical Engineering C245 – Lecture 14: Energy Methods I

admin — Mon, 17 Oct 2011 05:48:16 +0000

Introduction to MEMS Design

Duration : 1:21:45

Electrical Engineering C245 – Lecture 14: Energy Methods II:

admin — Mon, 17 Oct 2011 05:48:16 +0000

Introduction to MEMS Design

Duration : 1:21:2

Introduction to MEMS technology

admin — Mon, 07 Mar 2011 21:50:11 +0000

Speaker: Jens Kaufmann from university of Edinburgh.
Inroduction to MEMS: skills for very small ninjas a lecture given by Jens Kaufmann, in the 24 Chaos Communication congress on December 27-30 2007 in Berlin Germany.

MEMS is the acronym for Micro-Electro- Mechanical Systems also known as f micro system technology in Europe, systems with electrical and mechanical subsystems at the micro scale. It is basically an introduction in the technology and in its potential for hardware hacks and potential ways of homebrew devices.

This talk is giving you an overview of available MEMS, there fabrication processes and restriction as well as future developments and the possibility of start of your own MEMS farm.

For more information visit: http://bit.ly/24c3_information
To download the video visit: http://bit.ly/24c3_videos

Duration : 0:41:21

Lecture – 32 Introduction to Finite Element Method

admin — Sun, 28 Feb 2010 15:08:04 +0000

Lecture Series on Computational Methods in Design and Manufacturing by Dr.R. Krishnakumar, Department of Mechanical Engineering, IIT Madras. For More details on NPTEL visit http://nptel.iitm.ac.in

Duration : 0:49:7

Lecture – 19 Introduction to Finite Element Method

admin — Sat, 27 Feb 2010 15:07:10 +0000

Lecture Series on Computational Methods in Design and Manufacturing by Dr. R. Krishnakumar, Department of Mechanical Engineering, IIT Madras. For more details on NPTEL visit http://nptel.iitm.ac.in

Duration : 0:51:14

Lecture – 18 Introduction to Finite Element Method

admin — Fri, 26 Feb 2010 18:01:08 +0000

Lecture Series on Computational Methods in Design and Manufacturing by Dr. R. Krishnakumar, Department of Mechanical Engineering, IIT Madras. For more details on NPTEL visit http://nptel.iitm.ac.in

Duration : 0:50:32